10 to 32 Volt quadpak input 5v Logic

Datasheet Download Link

SKU: IDC5Q Category: Quad Pak Tags: DC, Digital, G1, Input, Opto22

Quad Pak I/O family

The IDC5Q is a 4-channel DC digital input. It accepts input voltage of 10-32 VDC and uses 5 VDC logic. It is compatible with Opto 22 Optomux, Pamux, and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. This module can also be used with a Raspberry Pi, the Digital I/O Carrier Board (part number OPTO-P1-40P), and the PB16HQ mounting rack.

Quad Pak modules contain the equivalent of four single-channel I/O circuits in a single package. Each Quad Pak module can be divided into two pairs, with each pair sharing a common connection.

Quad Pak modules plug into Quad Pak I/O mounting racks. They are not compatible with single-channel racks or SNAP racks.

This DC input module is designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free “clean” switching. Typical uses and applications include sensing the presence or absence of voltage or sensing contact closures from sources such as:
– Proximity Switches
– Limit Switches
– Selector Switches
– Push Buttons
– Toggle Switches
– Thermostats
– Photoelectric switches
– TTL-compatible devices